Utility-room install
Clean, labelled, documented.
Wall-mounted inverter with a stacked LFP battery bank. Cable tray, labelled circuits, accessible BMS — every installation reads like an engineering drawing.
Solutions
Built around how the load is actually used.
From self-consumption and small commercial peak shaving to off-grid and backup power — each deployment profile is built around a clear architecture with published datasheets behind every number.
Residential
Self-consumption with backup.
Pair a VE-HB hybrid inverter with VE-LB low-voltage battery modules (5 / 10 / 16 kWh) to shift solar into the evening and keep critical loads running through outages. Switchover under 10 ms, monitored from a phone app, paired with a single-phase or split-phase output.
Typical array
4 - 12 kWp
Storage
5 - 30 kWh
Backup loads
Critical circuit (sub-10 ms)
Inverter
VE-HB single / split-phase
Small commercial
Cut the peak, keep the lights on.
Shops, cafés, workshops and small offices shave demand charges and survive blackouts with the same architecture scaled up: a three-phase inverter stack plus stacked battery capacity. Per-phase unbalanced output means single-phase loads still get covered during a fault.
Typical array
10 - 50 kWp
Storage
30 - 100 kWh
Payback focus
Demand shaving
Inverter
VE-HB three-phase 6 - 30 kW
Backup power
When the grid goes dark, the home doesn't.
Sub-10 ms automatic switchover keeps the lights, fridge, internet and medical equipment running through an outage. The system watches grid voltage in real time and disconnects cleanly into island mode — no flicker, no manual reset.
Switchover
Under 10 ms
Island mode
Automatic, anti-islanding
Critical load panel
Up to whole-home backup
Generator input
Auto-start ready
Weak-grid & off-grid
Systems that tolerate unstable supply.
Wide AC input windows, generator input and load-step capability make our hardware a practical choice where brownouts are weekly events — remote sites, agricultural pumps, telecom towers, islands.
90 - 280 V
AC input window
50 / 60 Hz
Dual frequency
0 - 100%
Load step capability
Yes
Generator input
Hardware & monitoring
The equipment and the eyes on it.
App monitoring
Every kWh, every Watt, on your phone.
Live solar production, battery state of charge, grid import/export and load breakdown. Push notifications for outage events and firmware updates.
Send us your load profile. We will propose the layout.
Tell us the array size, expected daily kWh and the loads you want backed up. We'll come back with a bill-of-materials and a one-line diagram.